Filtry kapsułowe Polycap TF

Filtry kapsułowe wykonane z trwałych, hydrofobowych membran z politetrafluoroetylenu (PTFE) w obudowie polipropylenowej, przeznaczone do stosowania z rozpuszczalnikami organicznymi i roztworami agresywnymi.
Whatman Polycap TF filters are made with durable, hydrophobic polytetrafluoroethylene (PTFE) membranes in a polypropylene housing for use with organic solvents and chemically aggressive solutions.

• PTFE filter membrane is resistant to most solvents
• Available in 0.05, 0.1, 0.2, 0.45, and 1.0 µm pore sizes
• 0.05 µm pore size capsules capsules designed for ultra-clean applications
• 1.0 µm pore size capsules used for extended life and filtration of highly contaminated solutions
• Manufactured according to ISO9001:2008 QMS standards
• Autoclavable capsule filtration device if sterility is required

We offer a variety of Whatman Polycap filter options beyond PTFE filter membrane media. Browse the Whatman range to find the right capsule filter for your application.

Whatman Polycap filter for aggressive solvents
Filtration of organic solvents and aggressive solutions requires a durable membrane for filtration without sample contamination.

Autoclavable Polycap TF capsule filters feature PTFE membranes with high chemical resistance. Common applications include venting, in-line filtration to sterilize* and remove particles from air/gas/liquid streams, filtration to ensure clean inert gases in vial filling lines, and isolation of exhaust from fermenters.

Polycap TF filters support use in the electronics, pharmaceutical, and biopharmaceutical industries, because they are photoresistant and can be used to vent and perform in-line filtration for production systems in biological environments.
Filtry kapsułowe Polycap TF
Filtry kapsułowe Polycap TF
Housing Polypropylene (PP) 
Operating pressure max. 4.1 bar (60 psi) 
Vent On inlet 
Flow Direction Supported bidirectionally. Certain applications may require orientation; i.e.; vents. Reverse flow only for low pressure applications. 
Sterilization May be autoclaved at 121°C for 20 minutes. Multiple autoclave cycles are possible. However; the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving.Compatible with EtO sterilization. 
Sealing Heat-fused 
Support System Polypropylene (PP)
Product Product Name Dimensions Pore Size Inlet Connector Outlet Connector
2601T Polycap TF 36 Capsule Filter; 0.2 µm; with FNPT inlet and outlet (5 pcs) 36 mm 0.2 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2602S Polycap TF 36; 0.45 µm; with 1.5 in sanitary inlet and outlet (1 pc) 36 mm 0.45 µm 1 ½" Sanitary 1 ½" sanitary
2603T Polycap TF 36; 1.0 µm; with FNPT inlet and outlet (5 pcs) 36 mm 1 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2700T Polycap TF 75; 0.1 µm; with FNPT inlet and outlet (5 pcs) 75 mm 0.1 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2702M Polycap TF 75; 0.2 µm; with MNPT inlet and outlet (5 pcs) 75 mm 0.2 µm Male national pipe thread (MNPT) Male national pipe thread (MNPT)
2702T Polycap TF 75; 0.2 µm; with FNPT inlet and outlet (5 pcs) 75 mm 0.2 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2703T Polycap TF 75; 0.45 µm; with FNPT inlet and outlet (5 pcs) 75 mm 0.45 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2800T Polycap TF 150; 0.1 µm; with FNPT inlet and outlet (5 pcs) 150 mm 0.1 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2801 Polycap TF 150; 0.2 µm; with 1.5 in sanitary inlet and outlet (5 pcs) 150 mm 0.2 µm 1 ½" Sanitary 1 ½" sanitary
2802T Polycap TF 150; 0.2 µm; with FNPT inlet and outlet (5 pcs) 150 mm 0.2 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2803T Polycap TF 150; 0.45 µm; with FNPT inlet and outlet (5 pcs) 150 mm 0.45 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
2804T Polycap TF 150; 1.0 µm; with FNPT inlet and outlet (5 pcs) 150 mm 1 µm Female national pipe thread (FNPT) Female national pipe thread (FNPT)
6700-3602 Polycap TF 36; 0.2 µm; with 3/8 in SB inlet and outlet (1 pc) 36 mm 0.2 µm Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6700-3610 Polycap TF 36; 1.0 µm; with 3/8 in SB inlet and outlet (1 pc) 36 mm 1 µm Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6700-7501 Polycap TF 75; 0.1 µm; with 3/8 in SB inlet and outlet (1 pc) 75 mm 0.1 µm Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6700-7502 Polycap TF 75; 0.2 µm; with 3/8 in SB inlet and outlet (1 pc) 75 mm 0.2 µm Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6700-7504 Polycap TF 75; 0.45 µm; with 3/8 in SB inlet and outlet (1 pc) 75 mm 0.45 µm Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6701-7510 Polycap TF 75; 1.0 µm; with ½ in SB inlet and outlet (1 pc) 75 mm 1 µm Stepped barb for 10 to 12 mm (3/8 to ½") tubing Stepped barb for 10 to 12 mm (3/8 to ½") tubing
6710-3602 Polycap TF 36; 0.2 µm; with ½ in SB inlet and outlet (1 pc) 36 mm 0.2 µm Stepped barb for 10 to 12 mm (3/8 to ½") tubing Stepped barb for 10 to 12 mm (3/8 to ½") tubing
6710-7502 Polycap TF 75; 0.2 µm; with ½ in SB inlet and outlet (1 pc) 75 mm 0.2 µm Stepped barb for 10 to 12 mm (3/8 to ½") tubing Stepped barb for 10 to 12 mm (3/8 to ½") tubing
6711-3601 Polycap TF 36; 0.1 µm; with MNPT inlet and 3/8 in SB outlet (1 pc) 36 mm 0.1 µm Male national pipe thread (MNPT) Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6711-3602 Polycap TF 36; 0.2 µm; with MNPT inlet and 3/8 in SB outlet (1 pc) 36 mm 0.2 µm Male national pipe thread (MNPT) Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6711-3604 Polycap TF 36; 0.45 µm; with MNPT inlet and 3/8 in SB outlet (1 pc) 36 mm 0.45 µm Male national pipe thread (MNPT) Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
6711-7502 Polycap TF 75; 0.2 µm; with MNPT inlet and 3/8 in SB outlet (1 pc) 75 mm 0.2 µm Male national pipe thread (MNPT) Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing