Niesterylne filtry membranowe z azotanu celulozy - 0.2 µm

Membrany z azotanu celulozy, krążki, gładkie.
Cellulose nitrate membranes, circles, plain

• Narrow pore size distribution for improved surface capture and analysis.
• Low levels of extractables to ensure sample integrity.

Recommended for the majority of routine applications, this membrane is manufactured under strictly controlled conditions. The user will benefit from the performance improvements that are now available in Whatman membrane filters, including very narrow pore size distribution and low levels of extractables.

Higher strength and flexibility
Most membranes are inherently brittle and difficult to handle; it is not uncommon for filters to be damaged during loading into holders or while in use. Whatman cellulose nitrate membrane filters have a noticeably improved flexibility and are made to tolerate abuse during handling, loading, and autoclaving without sacrificing integrity. These membranes are among the strongest of their type available, as measured and compared by burst pressure tests.

Low extractable levels
The level of extractables in membrane filters has become more important with advances in filtration or adsorption techniques. In particular, pharmaceutical, immunological, and biomedical tissue culture and trace analysis applications can be adversely affected by high extractable levels. Whatman cellulose nitrate membrane filters have a low level of extractables, generally below that of other membranes of a similar type.

Narrow pore size distribution
One of the major features of Whatman membrane filters is the narrow distribution of pore sizes. The rated pore size of these membranes is closely controlled due to the advanced manufacturing and control system. Additionally, the batch-to-batch variation is minimized providing more consistent laboratory results.

Increased temperature stability
Membrane filters are normally autoclaved at 121°C without loss of integrity. Cellulose nitrate membranes are supplied as circles, sheets, or reels.

Reduced shrinkage
Excessive shrinkage can cause problems during autoclaving and is often the cause of membranes tearing in their holders after autoclaving. It may also cause a reduction in flow rate and total throughput. Whatman membranes exhibit a low shrinkage during autoclaving.

White plain filters
This is the standard membrane filter for the majority of laboratory applications involving particles and cells in the range of 0.1 µm to 12.0 µm. The residue after filtration is found to be almost completely on the surface of the membrane and allows physical recovery of deposits and microscopic examination.

Product 10401306: Discontinued. No new products will be manufactured after 30th September 2017. No alternative is available.
Niesterylne filtry membranowe z azotanu celulozy - 0.2 µm
Application Sample preparation Microbiological studies Filtration of aqueous solutions 
Autoclavable Yes 
Color White 
Field of Application Sterilizing (General) Total bacteria count (Food and beverage QC) Sterile filtration (Tissue culture) 
Hydrophobic No 
Hydrophilic Yes 
Material Cellulose Nitrate 
Membrane Type Plain 
Operating temp. max. 80°C
Porosity Max. 84
Porosity Min. 66
Sterility Nonsterile 
Weight Max. 5.5 mg/cm
Weight Min. 3.6 mg/cm
Product Product Name Diameter Pack size
10401306 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 25 mm 25 mm
10401312 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 47 mm 47 mm 100 pieces
10401314 Cellulose Nitrate Membrane Circle; plain; 0.2 µm; 50 mm 50 mm 100 pieces
7182-001 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 13 mm 13 mm 100 pieces
7182-002 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 25 mm 25 mm 100 pieces
7182-004 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 47 mm 47 mm 100 pieces
7182-009 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 90 mm 90 mm 25 pieces
7182-014 Cellulose Nitrate Membrane Circle; plain; 0.2 µm pore size; 142 mm 142 mm 25 pieces
Brak powiązanych dokumentów