AcroPak™ 300 Capsule with PTFE membrane, a Pall Life Sciences product, are recommended for bioreactor venting requiring high air flow rates.
Offers broad chemical compatibility with PTFE membrane and polypropylene housing
100% integrity-tested to provide the high level of confidence you require
Materials of Construction
Filter Media: PTFE on a polypropylene support
Housing: Polypropylene
Effective Filtration Area
280 cm2
Dimensions
Length: 10.5 cm (4.1 in.) with hose barbs
Housing Diameter With Vent: 6.7 cm (2.6 in.)
Housing Diameter Without Vent: 5.3 cm (2.1 in.)
Inlet/Outlet Connections
Stepped hose barbs 6.4 - 12.7 mm (1/4 - 1/2 in.) diameter
Typical Hold-Up Volume
< 6 mL
Maximum Operating Temperature
60°C (140°F) at 2.1 bar (210 kPa, 30 psi)
Maximum Operating Pressure
4.1 bar (410 kPa, 60 psi) at ambient temperature
Recommended Integrity Test Minimum Bubble Point - 60% IPA/40% H2O (v:v)
1.2 bar (120 kPa, 18 psi)
Typical Liquid Flow Rate (1 cp)
0.8 L/min/0.1 bar (10 kPa) 0.6 L/min/psi
Typical Air Flow Rate
32 L/min/0.07 bar (7 kPa, 1 psi)
Bacterial Retention
Lot samples retain a minimum of 107 cfu/cm2 of B. diminuta per modified ASTM F838, current revision
Endotoxin Level
< 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test
Biological Safety
Passes United States Pharmacopeia (USP) Biological Reactivity Test, In Vivo <88>
Sterilization
Provided non-sterile. Can withstand 10 autoclave cycles at 121 - 123°C (250 - 253°F) for a maximum of 20 min. Integrity should be verified after each autoclave cycle and before use.
Applications
Recommended for bioreactor venting requiring high air flow rates
Useful device for chemical and solvent filtration.
